2. make sure that there is no background noise on the car, and turn off any playing music
3. open up your amplifier and click on the button “channel diversity” so all channels are getting power
4. turn up everything but bass until it sounds appropriate to you- usually this would be about 10% of maximum volume
5. put head phones in or crank up stereo speakers inside depending on if its an external or internal amp
the main change you are trying to make is balancing out volumes between frequencies accordingly with distances from speaker position to ear position – use a room calibrator app like room eq wizard, audyssey multeq editor ds
how do i adjust my amp?
when adjusting an amp, it's best if you know the technical stuff about the amps specific to your model. there are plenty of tutorials out there on youtube, but for some models it might be better not to touch until you know what you're doing because it could fry your speakers or worse–so please take that into account. if you don't want that kind of risk then just take the amp in for a service call.
what frequency should i set my amp to?
if the sound is too high, experiment with lowering it to find that perfect note.
if you're having trouble hearing your instrument, try raising the frequency. remember, this article isn't about how to increase noise levels!
moral of the story? figure out what you want before embarking on a journey of tone management – it may be time consuming. try this for example: rocksmith 2014 edition download- full game iso includes all updates . we suggest playing with some amps to make sure they are tuned right for your needs. and if you are looking for something new, there's always gear at quoting & data “best music gear online” ��.. check them out!
what should i set my hpf and lpf to?
hpf might not be needed depending on your environment, but lpf should always be set to the lowest frequency possible.
higher frequencies are much easier to transmit through glass windows and hard surfaces than lower frequencies. setting your lpf to a low setting will ensure that these high frequency sounds are still being captured if you're capturing audio inside your house or office building. for outdoor recordings, try experimenting with different low-cut settings to find the best one for your specific recording condition before settling on anything in particular.
how do you set up a car amp?
step 1: make sure the following are in place, and working properly. – the battery (getting too old will either not allow enough power to come through for you to get loud or make it difficult to turn on)
-the amplifier (turning it on without an input is only going to make noise emission)
-input devices (many people like cassette tape, cd players, aux cords, ubs cords for this)
step 2): test the speakers/subwoofers with any input device that plugs into your amplifier. hook one up then adjust settings until you can adequately hear what's playing. connect other devices while also turning the volume knob while listening at different levels each time. whoever sets
